10
6.
Open your computer's audio interface and ensure
that STi12 USB is selected as the audio input and
output device.
Congratulations, your USB Audio Recording Interface is
installed and ready for use!
OPERATION GUIDELINES
•
To prevent transient spikes from damaging your
equipment, always turn the two MIC GAIN1, GAIN2,
and MONITOR knobs fully counterclockwise to the
minimum position before making or breaking any
connections.
•
Even if using a condenser microphone that requires
+48V phantom power, ensure that the +48V switch
is in the off position (out) before plugging a
microphone into the MIC 1 INPUT jack. Turn on
+48V phantom power only when a condenser
microphone is connected.
•
The PHONE jack on the rear panel allows you to
play music from a mobile device, so you can play or