Use this button to cycle through the time display options: Elapsed Time (of track), Remaining Time
(of track), and Total Remaining Time (of CD).
Press this button to switch between SINGLE and CONTINUOUS playback mode. When in SINGLE
mode, playback will stop after each track. In CONTINUOUS mode, playback will continue from track
to track until the end of the CD is reached.
Press this button to cycle through the repeat modes: No Repeat, Repeat Track, and Repeat Disc.
PGM BUTT
ON
You can program up to 20 tracks to playback in the desired sequence:
a. Press the PLAY/PAUSE button (13) to stop playback.
b. Press the PGM button to enter Program Mode.
c. Use the TRACK SKIP buttons (8) to select the desired track.
d. Press the PGM button to enter the selected track into the program sequence.
e. Repeat steps c and d until you have selected all the tracks you want.
f. When you have selected all the tracks you want in the playback sequence, press the
PLAY/PAUSE button to begin playback of your programmed selections
This button activates Navigation mode, which allows you to navigate through the folders/directories
in either USB or CD mode. See 14. USB PORT for detailed navigation instructions.
These buttons allow to move the play point forward or backward within the current track.
Pressing the Next Track button skips the play point forward to the beginning of the next track.
Pressing the Previous Track button skips the play point backward to the beginning of the current
track. If the play point is already at the beginning of the track, pressing the Previous Track button
will move the play point back to the beginning of the previous track.
Press the DSP/BRAKE button to toggle Brake mode on/off. When in Brake mode, pressing the
PLAY/PAUSE (13) button will simulate the start and stop times of a turntable. The button's LED
is illuminated when Brake mode is active.
DSP/REVERSE
Press the DSP/REVERSE button to play the track in revers
e
. Press it again to return to
normal forward play.
PITCH BEND/SEARCH/SCRATCH BUTTON
Press this button to select the functionality of the Jog/Shuttle Wheel (22). Each press of the button
cycles to the next function, with the button lighting up or not to indicate the currently selected mode:
* When the button is not illuminated, moving the Jog/Shuttle Wheel will perform a pitch bend.
* When the button is fully illuminated, moving the Jog/Shuttle Wheel will search forward or
backward through the current track.
* When the button is flashing, moving the Jog/Shuttle Wheel will produce a "scratch" effect.
Pressing the CUE button during playback moves the play point back to the position at which
playback was started.
Press the PLAY/PAUSE button to start or stop playback.
3
