2
MASTER VOL
LOW
-dB
+dB
GAIN
-dB
+dB
GAIN
-dB
+dB
HIGH
-dB
+dB
HIGH
-dB
+dB
LOW
-dB
+dB
MIC VOL
power
1. CHANNEL GAIN:
Adjusts the corresponding channel’s
pre-EQ gain level.
2. CHANNEL HIGH:
Adjusts the high (treble) frequencies
of the audio on the corresponding
channel.
3. CHANNEL LOW:
Adjusts the low
bass
frequencies of
the
audio on the corresponding channel.
4. MIC VOL:
Adjusts the audio level of the
microphone
signal.
5. CROSS-FADER:
Mixes the audio playing in each of
the two channels. When the slider is
to the left, you hear only Channel 1,
and when it is to the right, you hear
only Channel 2. When the slider is in
the middle, you will hear both channels
at the same time.
6. HEADPHONE VOL:
Adjusts the level of the headphone audio.
7. MASTER VOL:
T
his control adjusts the output
volume of the program mix
.
8. POWER LED:
Indicates the unit is powered on.
9
. MIC INPUT:
This is a 1/4" TS jack for use with a dynamic
microphone. The microphone controls are
located on the top panel.
10. HEADPHONES:
This is a 1/4" TRS jack for use with a pair
of
headphones for cueing. When cueing,
Channel 1
will play into the left earpiece and
Channel 2 will playback into the right earpiece.
MIC IN
HEADPHONE
Top Panel
Front Panel
Summary of Contents for 614305
Page 1: ...USER S MANUAL ...
