7
Set Maximum Pan Angle
1.
Press the Mode button until the display shows PA54, PA36, or PA18.
2.
Press the Up/Down buttons to select the desired setting.
3.
Press the Enter button to confirm the selection.
Set Maximum Tilt Angle
1.
Press the Mode button until the display shows ti27, ti18, or ti9.
2.
Press the Up/Down buttons to select the desired setting.
3.
Press the Enter button to confirm the selection.
Reset the Device
1.
Press the Mode button until the display shows rESt.
2.
Press the Enter button to confirm the selection.
Restore To Factory Defaults
1.
Press the Mode button until the display shows LoAd.
2.
Press the Enter button to confirm the selection.
OPERATION
Stand-Alone (Auto) Mode
This mode allows you to run a factory installed program at one of two speeds.
1.
For Fast Auto Mode, press the Mode button until the display shows nAFA.
2.
Press the Enter button to confirm the selection.
3.
The display will show FASt.
