DMX TERMINATION
As with all DMX devices, the last unit in any chain must have a DMX
terminator connected to the DMX output. If using just a single light,
connect a DMX terminator to the DMX output.
A DMX terminator is a DMX plug with a 120-ohm, 1/4-watt resistor
soldered between pins 2 and 3.
SAMPLE WIRING DIAGRAM
The following diagram shows a sample wiring chain using multiple lights. Note that
as with all DMX chains, the last unit must have a DMX terminator connected to the
DMX output.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with
any questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come
online to talk to one of our friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com
during regular business hours, 7 days a week.
You can also get assistance through email by sending a message to
12