Installation Instructions
To use the USB Docking Station, you must first install the driver onto your computer.
IMPORTANT:
The devices connected to USB Docking work only after the installation process is
completed. You must complete the installation instructions before using any device connected to
USB Docking.
After installing your software, connect the docking station to your computer and
Windows plug-and-play will install the hardware drivers for each port.
Installation
1. Turn on your computer.
2. Insert the CD into your computer’s CD-ROM drive.
If setup does not begin automatically, click Start, Run, and enter D:\
USBDocking.exe (where D: is the
path of your CD-ROM drive) and then click OK.
