7
7.
Plug one end of the included AC Power Cord into the AC INPUT on the rear
panel, then plug the other end into a nearby AC power outlet.
8.
Place the POWER switch on the rear panel in the ON position. This puts the
speaker into standby mode.
9.
Press the ON/STANDBY button on the top panel to turn the speaker on.
CHARGING
This speaker contains an internal Lithium battery. As long as the speaker is plugged into
a live AC power outlet and the POWER switch on the rear panel is in the ON position,
the internal battery will automatically charge.
BLUETOOTH PAIRING
Perform the following steps to pair the speaker with your Bluetooth® device.
1.
Place the POWER switch on the rear panel in the ON position.
2.
Press the ON/STANDBY button on the top panel to turn the speaker on.
3.
Repeatedly press the SOURCE button on the top panel until the BT LED in the
SOURCE INDICATORS group illuminates.
4.
Press the PAIR button on the top panel to put the speaker into Bluetooth®
pairing mode. The BT LED in the SOURCE INDICATORS group will start flashing,
indicating that the speaker is in Bluetooth pairing mode.
5.
Open the Bluetooth settings on your mobile device and scan for nearby
Bluetooth devices.
6.
Locate and select the MP43666 entry. If prompted for a passcode, enter 0000
(four zeros). Once connected, the BT LED in the SOURCE INDICATORS group will
stop flashing and will illuminate steadily.
Note that the speaker will remember the device it was last paired to. To reconnect after
the connection has been broken, open the Bluetooth settings on your device and select
Connect to reestablish the connection.
