5
CHARGING
When the headphones say Battery low, the battery is low and needs to be
charged. Perform the following steps to charge the battery.
1.
Plug one end of the included USB-C® Charging Cable into the
USB-C Charging Port on the headphones, then plug the other end
into a USB power source, such as a computer, wall charger, power
bank, etc. (not included). The Bluetooth LED will illuminate solid
red, indicating that charging is in progress. It will take about 2~3
hours for a full charge.
Note that if the headphones are powered on, they will
automatically turn off when connected to a USB charging source.
2.
When charging is complete, the Bluetooth LED will illuminate solid
blue, indicating that charging is complete.
3.
Unplug the USB-C Charging Cable from the headphones and the
USB power source.
PAIRING
1.
With the headphones powered off, press and hold the MFB for 5
seconds to turn the headphones on and put them into Bluetooth®
pairing mode. The Bluetooth LED will flash red and blue alternately,
indicating that that the headphones are in Bluetooth® pairing
mode.
2.
Open the Bluetooth settings on your mobile device and scan for
nearby Bluetooth devices.
3.
Locate and select the MP43239 entry. If prompted for a passcode,
enter 0000 (four zeros). Once connected, the Bluetooth LED will