14
IR CONTROL
The system features two-way IR control, allowing you to control
the source devices from the remote display locations and to
control the remote displays from the matrix location.
To control a source device from the display locations, plug one of
the included IR receivers into the IR IN jack on
each HDBaseT™
receiver and position it where it can receive IR control signals.
Next, either plug one of the included IR transmitters into the IR
OUTPUT ALL jack on the matrix and position it where it can
transmit IR signals to all the source devices or plug four IR
transmitters into the numbered IR OUTPUT jacks and position
each where it can transmit IR signals to the corresponding source
device.
To control the remote displays from the matrix location, plug one
of the included IR transmitters into the IR OUT jack on each
HDBaseT receiver and position it where it can transmit signals to
the display's IR receiver window. Next, if you want to control all
displays at once, plug one of the included IR receivers into the IR
INPUT ALL jack on the matrix and position it where it can receive
IR signals from the remote control. If you want to control the
remote displays individually, plug one of the included IR receivers
into the numbered IR INPUT jacks on the matrix and position
them where they can receive IR signals from the remote controls.
