18
1y = Controller 1 (Master)
2y = Controller 2 (Slave 1)
3y = Controller 3 (Slave 2)
x0 = All zones on the specified Controller
x1 = Zone 1
x2 = Zone 2
x3 = Zone 3
x4 = Zone 4
x5 = Zone 5
x6 = Zone 6
Combine the above codes to set the specific zone and controller to control. For example, 25
represents Zone 5 on Controller 2 and 30 represents all zones on Controller 3.
PP represents the Control Action Code and uu represents the setting/value for the Control Action
Code. Following are the PP codes and the range of allowed values:
PR = Power control (00 = off, 01 = on)
MU = Mute control (00 = off, 01 = on)
DT = Do Not Disturb control (00 = off, 01 = on)
VO = Volume control (00-38)
TR = Treble control (00-14)
BS = Bass control (00-14)
BL = Balance control (00-20)
CH = Source Channel control (01-06)
In addition to issuing commands, you can query the status of a one or more zones using the following
command structure:
•
?xyCR
•
?xyPPCR
xy represents the Control Command Code where x is the Controller and y is the zone(s):
1y = Controller 1 (Master)
2y = Controller 2 (Slave 1)
3y = Controller 3 (Slave 2)
x0 = All zones on the specified Controller
x1 = Zone 1
