15
Verifying the Installation
After positioning the new extender, perform the following steps to check that each extender has
a good connection.
1.
Open a web browser on your computer, then type http://ap.setup or 192.168.10.1 in the
address bar.
2.
Log in to the router. The default user name is admin and there is no password.
3.
Click Status > Device List to see a list of connected devices and their connection status.
TOUCHLINK
TouchLink is a system that allows you to connect to Wi-Fi® without inputting a password.
TouchLink is activated by touching the Gray Cap on the router or the White Cap on one of the
extenders.
Configuring TouchLink
Perform the following steps to configure the amount of time that TouchLink will remain active
after touching the Gray Cap on the router or White Cap on an extender.
1.
Open a web browser on your computer, then type http://ap.setup or 192.168.10.1 in the
address bar.
2.
Log in to the router. The default user name is admin and there is no password.
3.
Click Wi-Fi > TouchLink > Timer, then set the time to any value between 30 and 200.
