9
HOTKEYS
The switch can respond to several hotkey commands. The basic form of the hotkey
command is to tap the CAPS LOCK key twice, then tap the command key(s). The
following table shows the various hotkey commands that can be performed. The
individual keys to be tapped are separated with commas.
Command
Function
CAPS, CAPS, 1
Switch to PC1
CAPS, CAPS, 2
Switch to PC2
CAPS, CAPS, or
Switch to the next PC
CAPS, CAPS, or
Switch to the previous PC
CAPS, CAPS, S
Auto-scan every 10 seconds
CAPS, CAPS, S, #
Auto-scan every # seconds
CAPS, CAPS, Esc
Switch from auto-scanning every # seconds
to auto-scanning every 10 seconds
Note that the # above can only be a single digit.
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Modifying the equipment without Monoprice's authorization may result in the
equipment no longer complying with FCC requirements for Class A digital devices. In
that event, your right to use the equipment may be limited by FCC regulations, and you
may be required to correct any interference to radio or television communications at
your own expense.