7
PHYSICAL CONNECTIONS
Perform the following steps to make the physical connections
needed to use this amplifier.
1.
Ensure that all equipment to be connected is powered off
and unplugged from its power source.
2.
Using a 2-conductor speaker wire, connect the positive and
negative leads to the right channel speaker, then connect
the other end to the right channel Speaker Output terminals
on the amplifier. Ensure that the proper polarity is
maintained.
3.
Repeat step 2 for the left channel.
4.
(Optional) If you want to use a line input, plug one end of a
stereo audio cable (not included) into the 3.5mm Line Input
jack on the amplifier, then plug the other end into the line
output of your audio source device. If connecting the
headphone jack of a mobile device, use a 3.5mm-to-3.5mm
TRS audio cable (P/N 9764). If connecting to a device with
RCA outputs, use a 3.5mm-to-Dual-RCA audio cable (P/N
18269).
Note: The line-in and Bluetooth® connections are summed at the
output, which means that both sources will be audible at the
same time.
5.
Connect an AC power cord (not included) into the Power
Input connector on the amplifier, then plug the other end