12
c.
Shake the resin prior to filling the Resin Vat. Pigments can settle to the bottom
of the bottle, so make sure they are mixed properly prior to pouring.
d.
Pour resin to fill the vat about half way. If recycling used resin, be sure to filter it
to prevent cured resin from entering the vat and causing complications with the
auto leveling system.
QUICK START GUIDE
To get started quickly, follow these steps to make a test print:
1.
Remove the packaging materials from the box. Check the printer's Z axis for debris
from the packaging material.
2.
Insert the microSD™ card into the card slot on the printer, then power the printer
on.
3.
Select the Control option on the Main Menu to open the Control Menu.
4.
Verify that the printing LCD Display turns on by selecting the Clear option on the
Control Menu. The display will turn on for about 10 seconds.
5.
Ensure that the Resin Vat and build plate are clean and free of packaging material
and debris. Refer to the
CLEANING THE RESIN VAT section for details.
6.
Shake the resin bottle to ensure it is properly mixed.
7.
Fill the Resin Vat about half way using the included sample resin.
8.
Select the Back option on the Control Menu to return to the Main Menu.
9.
Select the Print option on the Main Menu.
10.
Select a model file from the list. You will be prompted to select a profile to use.
Select Okay to print using the default print profile. The printer will go to its Home
position, perform its leveling process, then start printing.
11.
Once the print is finished, twist the build plate to remove it. We recommend
twisting to release the magnets, as they have a relatively strong force and pulling
directly may drive the Printing Platform and the print into the Resin Vat.
