23
Touch the
↙
icon to move the build platform towards the front of the printer.
Touch the
↑
icon to move the extruder up.
Touch the
↓
icon to move the extruder down.
Touch the Back icon to return to the Setting Menu.
Camera Screen
The Camera Screen allows you to determine whether the built-in camera is on or off. You
can manually turn the camera on and off or can choose Auto Mode, where the camera
automatically turns on or off, depending on what the printer is doing at the moment. Note
that the camera and the USB port cannot be on at the same time. When the camera is on,
access to the USB port is off, and when the USB port is on, the camera is off.
Use the sliders to turn Auto Mode or Manual Mode
on or off. The two options cannot be on at the same
time. When one is turned on, the other
automatically turns off. When Auto Mode is
enabled, the camera will automatically turn on (with
the USB port off) when actively printing and will
turn off (with the USB port on) when not actively
printing. The option is on when the white ball is to
the right and off when it is to the left.
