Monoprice 30526 User Manual Download | Manualshive

Page: 64 / 67

background image

64

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to [email protected]

REGULATORY COMPLIANCE

Notice for FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the

«
...
62
63
64
65
66
...
»

Summary of Contents for 30526




































































Reviews:

No comments

Related manuals for 30526

Brand: Oki Pages: 62

Brand: TallyGenicom Pages: 144

Brand: Canon Pages: 21

Brand: Microplex Pages: 135

Brand: Oki Pages: 99

Brand: MF DIGITAL Pages: 2

Brand: Shandong New Beiyang Information Technology Co. Pages: 47

Brand: SPRT Pages: 18

Brand: DataCard Pages: 36

Brand: LG Pages: 33

Brand: LG Pages: 49

Pocket Photo PD221

Brand: LG Pages: 20

Brand: LG Pages: 31

Brand: WOOSIM Pages: 34

Brand: Geeetech Pages: 90

LaserMFD 6050 WLAN

Brand: Philips Pages: 2

Brand: PhotoCentric Pages: 4

Liquid Crystal MAGNA

Brand: PhotoCentric Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands