5
CONNECTION
Perform the following steps to install this scaler converter into your system.
1.
Power off and unplug all equipment to be connected.
2.
Place or mount the converter in its intended location.
3.
Using a High Speed HDMI® Cable (not included), plug one end into the HDMI input
on your display, then plug the other end into the HDMI OUT port on the converter.
4.
Using a High Speed HDMI Cable (not included), plug one end into the HDMI IN port
on the converter, then plug the other end into the HDMI output on your video
source device (e.g., Blu-ray Disc™ player, DVD player, gaming console, etc.).
5.
Plug the included AC power adapter into the DC 5V IN jack on the converter, then
plug the adapter into a nearby AC power outlet. The LED on the converter will
illuminate.
6.
Plug in and power on all connected equipment.
7.
Start video playback on your video source device, then verify that the video can be
seen on the connected display.
Congratulations, your scaler converter is installed and ready for use!
