Monoprice 2T2R User Manual Download | Manualshive

Page: 64 / 66

background image

-63-

Appendix 5 :Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference  received,  including  interference  that  may  cause
undesired operation.

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.    These  limits  are  designed  to  provide  reasonable
protection  against  harmful  interference  in  a  residential
installation.  This  equipment  generates,  uses  and  can  radiate
radio  frequency  energy  and,  if  not  installed  and  used  in
accordance  with  the  instructions,  may  cause  harmful
interference  to  radio  communications.    However,  there  is  no
guarantee  that  interference  will  not  occur  in  a  particular
installation.    If this equipment does cause harmful interference
to  radio  or  television  reception,  which  can  be  determined  by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
-

Reorient or relocate the receiving antenna.

«
...
62
63
64
65
66
»

Summary of Contents for 2T2R



































































Reviews:

No comments

Related manuals for 2T2R

Brand: Qlogic Pages: 2

Brand: Patton electronics Pages: 6

Brand: powerpack Pages: 9

Brand: TRENDnet Pages: 12

WaveBuddy EWP-813WA1

Brand: 11Wave Technology Pages: 33

Brand: Parani Pages: 48

Brand: P+S Technik Pages: 2

Brand: TP-Link Pages: 33

Thunderbolt RocketStor 6324U

Brand: HighPoint Pages: 10

Brand: SWEEX Pages: 8

Brand: Fein Pages: 145

Brand: NETGEAR Pages: 2

Brand: Jupiter Avionics Pages: 15

Brand: Alpine Pages: 102

Brand: Paradyne Pages: 20

Brand: Mitel Pages: 1113

Brand: Comcast Pages: 4

Actiontec PCI 802.11b

Brand: ActionTec Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands