7
INSTALLATION
1.
Ensure that all equipment to be connected is powered off and
unplugged from its power source.
2.
Place or mount the switch in its intended location.
3.
Using a DisplayPort 1.2 cable (not included), plug one end into the
DisplayPort display, then plug the other end into the DP OUT port on the
switch.
4.
Using a DisplayPort 1.2 cable (not included), plug one end into the DP IN 1
port on the switch, then plug the other end into the DisplayPort output
on your video source device.
5.
Using a DisplayPort 1.2 cable (not included), plug one end into the DP IN
2 port on the switch, then plug the other end into the DisplayPort output
on your video source device.
6.
Plug the DC barrel connector on the included AC power adapter into the
DC 5V jack on the switch, then plug the adapter into a nearby AC power
outlet. The PWR LED will illuminate, indicating that power has been
applied.
7.
Plug in and power on all connected equipment. Start video playback on
each connected source device. Verify that the video can be seen on the
display and that you can switch between the two video sources.
