Monoprice 18802 User Manual Download | Manualshive

Page: 30 / 31

background image

30

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with
any questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come
online to talk to one of our friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com or through email by sending a message to [email protected].
Check the website for support times and links.

REGULATORY COMPLIANCE

Notice for FCC

This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Modifying the equipment without Monoprice's authorization may result in the
equipment no longer complying with FCC requirements for Class B digital devices. In
that event, your right to use the equipment may be limited by FCC regulations, and you
may be required to correct any interference to radio or television communications at
your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:

«
...
28
29
30
31
»

Summary of Contents for 18802
































Reviews:

No comments

Related manuals for 18802

Syn Power 2.050

Brand: Macrom Pages: 26

Brand: rabbitone Pages: 2

Brand: L-Acoustics Pages: 46

Brand: L-Acoustics Pages: 24

Brand: Primare Pages: 10

1407A POWER AMPLIFIER

Brand: Altec Lansing Pages: 17

Brand: Boss Audio Systems Pages: 8

Brand: Eden Pages: 6

Brand: Alpine Pages: 19

Brand: K+H Pages: 96

Digital Technology XTDT3200

Brand: XTE Electronic Pages: 12

Brand: Perreaux Pages: 42

Brand: C.E.C. Pages: 10

Brand: Thule Audio Pages: 2

Brand: National Instruments Pages: 10

Brand: OM POWER Pages: 38

Brand: DaytonAudio Pages: 14

Brand: Inter-m Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands