10
17.
Give a gentle tug on each lead to ensure that they are securely connected to the
terminals.
18.
Ensure that the mounting tabs on the speaker assembly are turned inwards.
19.
Position the speaker into the hole.
20.
Using a #2 Phillips screwdriver, tighten each mounting screw to turn the mounting
tabs back outward. Continue tightening until the mounting tabs are firmly against
the back of the wall and the speaker is secure. Do not over-tighten the screws to
avoid damage to the mounting tabs.
21.
Reposition the foam insert inside the grille, then insert the grille into the speaker
frame.
22.
Ensure that your amplifier is powered off and unplugged from the power source.
23.
Connect the amplifier end of the speaker wire to one of the speaker level outputs
on your amplifier, taking care to match the polarity markings on the speaker wire or
plugs.
Congratulations, your speaker is installed and ready for use!
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to [email protected]
