9
OPERATING MODES
Normal Cleaning Mode
The Normal cleaning mode is an automatic
mode in which the vacuum automatically
switches between the three types of
cleaning paths. Normally, when in a room
with few obstacles, it will clean the floor
using an S-shaped path, as shown in the
diagram. When it detects a particularly dirty
spot, it will switch to Spot cleaning mode and when it detects obstacles, it will switch
to Edge cleaning mode. When cleaning is in progress, the LED display shows the current
time.
Spot Cleaning Mode
The vacuum will clean intensively in a spiral-
shaped cleaning pattern when it detects a
very dirty area or when the Spot cleaning
mode is manually activated.
Edge Cleaning Mode
The vacuum cleans along walls and
obstacles when it detects walls and
obstacles or when the Edge cleaning mode
is manually activated.
