background image

 

Ensure that power is turned off and disconnected before making any electrical 
connections. 

 

Remove the battery from the controller if it will go unused for a lengthy period of 
time. 

 

Unplug the monitor if it will go unused for a long period of time. 

 

Unplug the monitor before performing any cleaning. 

 

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or 
detergents. For stubborn deposits, moisten the cloth with warm water. 

 

This monitor has no user serviceable parts. Do not open the case or otherwise 
attempt to modify this monitor. 

 

INTRODUCTION 

Thank you for purchasing this Touch Screen Monitor! This touch screen monitor features 
two composite video inputs using BNC connectors and a pass-through composite BNC 
video output. It also features HDMI® and VGA inputs, as well as pass-through audio input 
and output. Usable out of the box as a capacitive type touch screen, it can be operated as 
a resistive type touch screen by using the included drivers. 
 

FEATURES 

 

Two composite BNC video inputs 

 

One composite BNC video pass-through output 

 

HDMI® and VGA inputs 

 

Can be used as a capacitive type touch screen without drivers or as a resistive type 
using the included drivers 

 

 

Summary of Contents for 15481
























Reviews: