manualshive.com logo in svg

Monoprice 12209, User Manual

Share
Download
Monoprice 12209 User Manual Download Page 7

2.  Connect the red/positive side of the wire to the red/positive 5-way binding post on 

the back of the speaker. Pull gently on the final connection to ensure that it is 
mechanically sound. 

3.  Connect the black/negative side of the wire to the black/negative connection on 

the back of the amplifier/receiver. 

4.  Connect the red/positive side of the wire to the red/positive connection on the 

back of the amplifier/receiver. 

5.  Visually inspect the connections on the speaker to ensure that the positive and 

negative polarities are properly connected. If using bare speaker wire, inspect to 
ensure that no stray wire strands are present. 

6.  Visually inspect the connections on the back of the amplifier for proper polarity 

and the absence of stray wire strands. 

Repeat steps 1-6 for the other speaker. 

 

TROUBLESHOOTING 

Q1: There is no sound coming from one or both speakers. 

A1: Verify that the speaker cable connections are properly made and that they are 

securely attached to both the speaker and amplifier/receiver. Verify that the 
amplifier is turned on and the volume is not at the minimum level. Check the 
amplifier to verify that the speakers are not disabled. Ensure that there is nothing 
plugged into the headphone jack on the amplifier. 

 

Q2: The sound coming from the speakers is weak, thin, tinny, or otherwise is not 

correct. 

A2: Verify that the speaker polarity matches the polarity on the amplifier. Check to 

ensure that the speaker wires are securely attached to the speakers and amplifier. 

 

TECHNICAL SUPPORT 

Monoprice is pleased to provide free, live, online technical support to assist you with 
any questions you may have about installation, setup, troubleshooting, or product 
recommendations. If you ever need assistance with your new product, please come 
online to talk to one of our friendly and knowledgeable Tech Support Associates. 
Technical support is available through the online chat button on our website 
(

www.monoprice.com

) during regular business hours, 7 days a week. You can also 

get assistance through email by sending a message to 

[email protected]

 

 

 

 

7 

Summary of Contents for 12209









Reviews:

No comments

Brands by name

Popular brands

Load more brands