5
AUDIO SUPPORT
Note that this converter only supports uncompressed PCM audio using a 48kHz
sampling rate. It does not support audio at any other sampling rate, nor does it support
AC3, DTS, or other audio formats.
In most cases, your HDMI source device will automatically select the appropriate audio
format and sampling rate. However, if you do not hear audio, you may need to manually
select PCM audio at 48kHz.
INSTALLATION
Perform the following steps to connect the converter to an HDMI video source and one
or more SDI devices.
1. Ensure that your SDI display(s), or other device(s), and your HDMI video source
device are powered OFF.
2. Plug one end of an SDI cable (not included) into the video input of your SDI
display or other device.
3. Plug the other end of the SDI cable into one of the SDI outputs on the converter.
4. (Optional) Repeat steps 2-3 for a second SDI display or device.
5. Plug one end of an HDMI cable (not included) into the HDMI input port on the
video converter.
6. Plug the other end of the HDMI cable into the video output of your HDMI video
source device.
7. Plug the DC connector on the AC adapter into the Power Jack on the video
converter.
8. Plug the AC adapter into a nearby power outlet.
9. Power on your SDI display(s) or other device(s).
10. Power on your HDMI video source device and start playback of HDMI video.
