OPERATION
Charging
Perform the following steps to charge built-in rechargeable battery prior to use and
whenever the battery level is low:
•
Ensure that the headphones are powered OFF.
•
Plug one end of the included USB cable into the charging port on the
headphones and the other end into a USB power source, such as a computer,
wall charger, backup battery pack, etc.
•
Depending on the current level of your USB power source, it can 2-3 hours to
fully charge the headphones. The LED indicator will glow red during charging.
•
When charging is complete the LED indicator will glow blue.
Power
•
Power ON the headphones by sliding the Power Switch (9) until a beep sounds
in the earpieces and the LED indicator begins flashing blue.
•
Power OFF the headphones by sliding the Power Switch (9) until a beep sounds
in the earpieces and the LED indicator flashes blue twice.
Bluetooth Pairing
1. Ensure that both the headphones and your phone are powered ON.
2. Ensure that the headphones and the phone are within about 3 feet of each other.
3. Press and hold the Multi-Function button (5) on the headsets until the LED
indicator glows blue steadily.
4. Ensure that the Bluetooth feature on your phone is enabled. Perform a search for
Bluetooth devices and select the headphones from the list.
5. If asked for a passkey, enter 0000.
6. If pairing is successful, the LED indicator will rapidly flash blue 10 times, then will
flash once every 3 seconds.
7. If pairing is unsuccessful, the LED indicator will remain steady blue.
8. If no Bluetooth connection is established within about 60 seconds, the Bluetooth
pairing mode will turn off and the LED indicator will turn off, as well.
Summary of Contents for 11178
Page 1: ......
