15
5.
Repeat steps 1-4 for the right channel connection.
6.
Visually inspect the connections at each end to verify correct polarity and
the absence of any stray wire strands.
SETUP
Once all connections have been made and inspected, check the volume levels of the
amplifier/receiver and the subwoofer, setting them to the minimum as necessary. Plug in
and power on all equipment, including the subwoofer.
Amplifier/Receiver Settings
If your amplifier/receiver has a speaker size setting, set it to "Small".
Subwoofer Settings
Power: The power switch on the subwoofer
has both an AUTO and a fully ON position.
When the switch is set to AUTO, the
subwoofer will automatically power on when it
detects an audio signal and, after several
minutes of inactivity, will automatically go into
standby mode. When the switch is set to the
ON position the subwoofer will remain
powered on at all times, until the switch is set
to the OFF position.
Note: If you will be away, or if the subwoofer
will go unused for a lengthy period, set the
power switch to the OFF position.