74
75
Setting the Meter and Deleting the Memory
Your meter comes with the time, date, unit of measurement, unit of tem-
perature preset, speaking function and memory deletion. If you need to
set these parameters, please follow below steps.
Start with the meter off. Then keep
pressing the S button. The meter is
now in the setting mode. You can start
setting up the meter.
STEP 1. Set the Year
Press the “Up” or “Down” button until the
desired year appears. Press the S button
and then the month segment flashes.
STEP 2. Set the Month
Press the “Up” or “Down” button until the
desired month appears. Press the S but-
ton and then the day segment flashes.
What
speaks?
What
speaks?
The month is January.
You are now in setting mode. The
Year is 2008.
STEP 3. Set the Day
Press the “Up” or “Down” button until the
desired day appears. Press the S button
and then the hour segment flashes.
STEP 4. Set the Hour
Press the “Up” or “Down” button until the
desired hour appears. Press the S button
and then the minute segment flashes.
What
speaks?
The day is 18th.
What
speaks?
The hour is 10 PM.
STEP 5. Set the Minutes
Press the “Up” or “Down” button until the
desired minute appears. Press the S but-
ton and then the current unit of measure-
ment flashes.
What
speaks?
The minute is 8.
STEP 6. Select mg/dL or mmol/L
Press the “Up” or “Down” button to select
the unit of measurement you want to use.
Press the S button and then the current
unit of temperature flashes.
What
speaks?
Blood glucose unit is milligrams per
deciliter.
