Monomachine SFX-6 User Manual Download

Page: 125 / 158

A-1

Appendix A:
MACHINE
REFERENCE

In this section all the Mono-synths of the Monomachine are introduced,
including specifications for individual machines.

SUPERWAVE

SuperWave takes its inspiration from the
analogue world. It gives warm and thick
sounds made from unique algorithms. The
Ensemble is specialised in creating poly-
phonic textures, chords and harmonies.

SUPERWAVE SAW “SWAVE-SAW”

The SuperWave Saw machine offers eight
analogue style oscillators, organised to bring
thick sounds with relevant controls.

The core of the sound is made up from one
base sawtooth oscillator. Setting all parame-
ters to their lowest value leaves only the
base sawtooth.

UNIL

(unison level) controls the level for the

unison oscillator

pair of sawtooth oscillators,

located over and under the base pitch.

UNIW

(unison width) sets the distance

between the unison oscillators and the base
pitch.

UNIX

(unison extended level) controls the

level of the two additional

unison extended

oscillators

(sawtooth). They are located over

and under the base pitch, at double the

UNIW

distance.

UNIX

is limited by the

UNIL

so to get any effect from the

UNIX

UNIL

has

to be increased first.

BASE PITCH OSC.

UNISON OSC.

EXTENDED UNISON OSC.

FREQUENCY

UNIW

UNIL

UNIX

2xUNIW

SUPERWAVE SAW ILLUSTRATION

Summary of Contents for SFX-6































































































































































Search results

Summary of Contents for SFX-6

Reviews:

Related manuals for SFX-6

Brands by name

Popular brands

Monomachine SFX-6, User Manual

Search results

Summary of Contents for SFX-6

Reviews:

Related manuals for SFX-6

Brands by name

Popular brands