9
Remote Control
1.
ON/STANDBY: Press the button to turn the
speakers on or to put them into standby
mode. Note that the POWER switch on the
Primary Speaker Rear Panel must be in the
ON position for this button to function.
2.
TONE DEFEAT: Press the button to bypass
the tone controls for an unaltered audio
signal, without changing the tone control
settings. Press the button again to reinsert
the tone controls into the audio signal path.
3.
PAIR: Press the button to enter Bluetooth®
pairing mode.
4.
TONE WHEEL: The TONE WHEEL allows you to boost or cut the low
frequency (BASS+/BASS-) and high frequency (/TREBLE-)
portions of the audio signal.
5.
0: If the 0 button is pressed within 20 seconds of using the TONE
WHEEL, the last tone control used (BASS or TREBLE) will be reset to
0. If the button is pushed without having used the TONE WHEEL in
the last 20 seconds, both the BASS and TREBLE tone controls will
be reset back to 0.
6.
SOURCE: Press the button to cycle through the inputs in the order
BT (Bluetooth®), USB, OPT (optical), and RCA.
7.
VOLUME: Use the buttons to increase or decrease the volume level.
8.
MUTE: Press the button to turn audio mute on or off.
