6
INSTALLATION
1.
Ensure that the Power Switch on the rear panel of the Master Speaker is in the
OFF position.
2.
Rotate the Volume Knob on the Master Speaker fully counterclockwise.
3.
Plug one end of the included Speaker Connection Cable into the Speaker Input
Connector on the rear panel of the Slave Speaker, then plug the other end into
the Speaker Output Connector on the rear panel of the Master Speaker.
4.
(Optional) Using a 3.5mm stereo audio cable (not included), plug one end into
the 3.5mm TRS Input Jack on the rear panel of the Master Speaker, then plug the
other end into the headphone output on your mobile device or other audio
source device.
5.
(Optional) Plug one end of a stereo RCA audio cable into the Stereo RCA Input
Jacks on the rear panel of the Master Speaker, then plug the other end into the
output jacks on your audio source device.
6.
Plug the DC barrel connector on the included AC Power Adapter into the DC
Input Jack.
7.
Plug one end of the included AC Power Cord into the AC Power Adapter, then
plug the other end into a nearby AC power outlet.
BLUETOOTH PAIRING
Perform the following steps to pair your mobile device with the speakers.
1.
Press the Power Switch on the Master Speaker to the ON position.
2.
Momentarily press and release the Bluetooth® Pairing Button on the Master
Speaker. The Power Indicator on the front of the speaker will begin flashing,
indicating that the speaker is in Bluetooth pairing mode.
3.
Open the Bluetooth settings on your mobile device, then scan for nearby
Bluetooth devices.
4.
Locate and select the MM-3 entry. If prompted for a passcode, enter 0000 (four
zeros). The Power Indicator on the front panel will cease flashing, indicating that
the Bluetooth connection has been successfully made.
