7
Design Guide
3/4” OVERLAY PANEL DIMENSIONS
(Flush Installation Only)
For a more custom appearance, overlay panels may be
installed to give a flush appearance with surrounding
cabinets. The overlay panel must be 3/4” thick. Panel
attaches to included brackets to provide mounting to the
appliance door.
NOTE: We recommend that decorative panels have inside
corners and edges rounded or beveled by cabinet maker to
avoid sharp edges on the panels. Edges to be treated should
include the top, bottom and hinge side edges.
IMPORTANT NOTE – DISPENSER MODELS
The refrigerator is supplied with matching adjustable
dispenser trims. The overlay dispenser trim is designed to fit
a total panel thickness of 3/4” plus up to 1/8” adjustability.
• If the panel is less than 3/4” a noticeable gap may be
created around the dispenser trim.
• If the panel is more than 3/4” and fully adjusted away
from door face, the dispenser trim cannot be secured to
the door.
Fresh
Food
Panel
Freezer
Panel
E
D
F
G
A
B
Grille Panel
C
Dispenser
Cutout
9-5/8"
Dispenser Cutout
15-3/8"
IMPORTANT NOTE: Maximum total weight for the assembled
panels:
•
Fresh food door panel – 75 lbs.
•
Freezer door panel – 53 lbs.
•
Grille Panel – 18 lbs.
Refrigerator
A
B
C
D
E
F
G
36” Side-by-Side
(in inches)
38” 10-5/8” 68-13/16” 16-7/8”
20-7/8”
18”
3-7/16”
42” Side-by-Side
(in inches)
44” 10-5/8” 68-13/16” 16-7/8”
26-7/8”
18”
3-7/16”
48” Side-by-Side
(in inches)
50” 10-5/8” 68-13/16” 20-7/8”
28-7/8”
18”
5-7/16”
Dispenser
Cutout
Position
1/2”
1/2”
1-1/4”
1”
1-1/4”
1”
Top/Bottom Hinge Clearance
Router 1/8” Deep
Improper installation can lead to a finger pinch
point hazard between the side door trim and the
cabinets when operating the door, especially
with children. To minimize this risk you must
follow the installation instructions for cabinet
dimensions, trim assembly, and door stop angle.
Door Trim Pinch Point Hazard
WARNING
