4
31-51544-9
CARING FOR YOUR STAINLESS
STEEL
• Before installation or first use, we strongly advise that
you polish the stainless steel exterior and handle with
a commercially available stainless steel cleaner such
as Stainless Steel Magic.™ To preserve and protect
the fine finish, we also strongly advise that you apply
stainless steel cleaner monthly.
STAINING WOOD DRAWER FRONTS
The drawer fronts are unfinished cherry wood. During
use, oil from hands may accumulate and stain the
wood.
• The drawer fronts may be stained and sealed to
match adjacent cabinetry.
• Apply the stain and sealer according to the
manufacturer’s instructions. To avoid unpleasant odor,
keep the door open to ventil ate and allow the stain/
sealer to dry completely before using the product.
CONTENTS
Important Information
.................................................2
Parts Required ..............................................................4
Caring for Your Stainless Steel .....................................4
Tools, Hardware ...........................................................4
Staining Wood Drawer Fronts ......................................4
Install Water Line .........................................................5
Design Guide (For ZIFS240 and ZIBS240)
The Installation Space ...................................................6
Side-by-Side Installations .............................................7
Product Clearances .......................................................7
Design Guide (For ZIFI240 and ZIBI240)
The Installation Space ...................................................8
Side-by-Side Installations .............................................8
Product Clearances .......................................................8
Installation Instructions
Step 1, Remove Packaging and Installation Parts ........9
Step 2, Reversing the Door (ZIFI240 models only) ......9
Step 3, Install Custom 3/4” Door Panel and Handle
(ZIFI240 and ZIBI240 models only).............................12
Step 4, Leveling...........................................................13
Step 5, Connect Water Supply
(ZIBI240 and ZIBS240 models only) ...........................13
Step 6, Connect Power ...............................................14
Step 7, Slide Product into Cutout ................................14
Step 8, Set Temperature Controls ..............................14
TOOLS/HARDWARE REQUIRED
• Adjustable wrench
• Carpenter’s glue (ZIFI240 and ZIBI240 models only)
• Screwdriver (ZIFI240 and ZIBI240 models only)
ZIFI240 AND ZIBI240 MODELS ONLY
PARTS REQUIRED
• Custom handle
• Assembled overlay panel
• Screws
PARTS SUPPLIED
• Handle side trim
• Optional black or
stainless steel toekick
Installation Instructions
REFRIGERATOR/FREEZER
LOCATION
Ŷ
Do not install the refrigerator/freezer where the
temperature will go below 55°F (13°C). It will not run
often enough to maintain proper temperatures.
Ŷ
Do not install the refrigerator/freezer where
temperatures will go above 100°F (37°C). It will not
perform properly.
Ŷ
Do not install the refrigerator/freezer in a location
exposed to water (rain, etc.) or direct sunlight.
Ŷ
Install it on a floor strong enough to support it fully
loaded.
Summary of Contents for ZIBS240
Page 15: ...31 51544 9 15 Notes...
