9
Finalize
Installation
• Place the small ceramic briquette tray at the
rear and larger tray towards the front.
• Place the grill grates over the opening.
Install
Rotisserie
• Remove burner grates.
• Remove front (large) ceramic briquette tray.
• Place small ceramic briquette tray in the rear
slots as shown.
• Place drip pan on the grill floor and against
the briquette tray.
• Slide the motor down into the channel on
the right side.
• To use, place pointed end of the skewer into
the motor, and the threaded end resting on
the left side support.
• Screw handle onto the threaded end of the
skewer.
Install
Optional
Access Doors
ZXADYSS
and
ZXSDBSS
(For Built-In
Installations
Only)
ZXADYSS - Double Doors
The opening should be 24-1/8" wide and
18-1/4" high.
ZXSDBSS - Single Doors
The opening should be 22" wide and 20" high.
Installation
24" Outdoor Cooking Center
• Place the frame into the opening and secure
with screws on all sides.
• Hang the doors on the hinges as shown.
Note:
The ceramic briquettes may move during shipping or when
repositioning for rotisserie use. For best cooking performance,
slide briquettes on the tray so they are evenly spaced and do not
block vent holes.
Note:
Remove motor when not in use. Store motor in dry place.
