Monogram Advantium ZSB9231N1SS, Installation Instructions Manual

Page: 8 / 28

8
31-7000080 Rev. 0
Installation Preparation with Accessory Storage Drawer
PREPARE THE OPENING (cont.)
The Advantium Built-In Oven can be installed in combination with other Monogram appliances. Always follow each
product’s Installation Instructions to complete the installation.
Single Advantium Built-In Oven Installation:
Order a 30
Ǝ
wide single oven cabinet or cut the opening in a wall to the dimensions shown.
STANDARD MOUNT:
30
Ǝ
23-1/2
Ǝ
25-1/4
Ǝ
Min.
21
Ǝ
36-3/4
Ǝ
Min.
Construct
solid bottom - Min.
3/8” plywood
supported
on all four sides.
Must be able to
support weight
of oven and
contents.
FLUSH MOUNT:
23-1/2
Ǝ
K*
23-5/8
Ǝ
36-3/4
Ǝ
Min.
Construct
solid bottom - Min.
3/8” plywood
supported
on all four sides.
Must be able to
support weight
of oven and
contents.
• When installed over a storage drawer, make the
bottom cleat height 3/4”.
‡$OORZí´FOHDUDQFHRQWKHVLGHVí´FOHDUDQFH
RQWKHWRSDQGí´FOHDUDQFHRQWKHERWWRPRIWKH
opening for all models.
• Oven overlaps will conceal cut edges on all sides of
the opening.
• When installed over a single oven or a warming
drawer, allow at least 2
Ǝ
between the two openings.
This separation will provide clearance for bottom
overlap of the Advantium Built-In Oven and the other
appliance overlaps.
• The support must be level and rigidly mounted, flush
with the bottom edge of the cutout.
Dimension 1/8”
Reveal
1/4”
Reveal
K 30” 30-1/4”
Preparation with an Accessory Storage Drawer
As needed, see the Standard Mount Installation Preparation OR Flush Mount Installation Preparation for
configuration details. Note the modified cutout height below.