Confidential
©
2020 Monoeric
International
Page 2
B.1 Product Description
This product is a smart phone charging stand that supports long-distance
wireless charging at distance of 15~35MM. It can wirelessly charge and
compatible with all devices (smartphones) with built-in wireless
receivers. It has over-voltage protection, over-current protection, over-
temperature protection, short circuit protection and foreign body
detection. This product is widely used in offices, household, restaurants,
conference rooms, etc.
B.2 Instruction for use
1.
It is necessary to clean the installation area before installing the product.
Then peel off 3M sticker on the product and stick on the installation
area (you can also use screws to lock).
2.
After completing the previous step, plug in the power supply. Use the
LED light board for position coordination. The best position is when all
four lights of the LED light board are on ( 35MM thickness only the
middle light of LED light board is optimal). After adjustment to best
position, mark the positon.
3.
Then use PC positioning sticker to fix the position. Peel the sticker on the
back of positioning sticker and stick firmly on the fixed position.
4.
After the alignment is completed, you can charge smartphones with
wireless charging function.
5.
Precautions
：
Please turn off the power when the product is not in use
to avoid excessive/over heating
