«
If spokes are close together:
Slide the m133s between spokes
sideways (as shown below), then
rotate into position
1. Put Inside Spokes
2. Attach in 2 places
MONKEYLECTRIC M133S
INSTALL INSTRUCTIONS
«
Line up 2 mount slots
with a spoke
«
Battery holder facing in
«
Rubber spacer between
unit and spoke
«
Feed zip-tie through
slots, around spoke, and
back through slots
«
If it just won’t fit inside, or you have
a special type of wheel – see our
website for other ways to mount.
«
Use the slot that
fits your spoke
4. Attach 3
rd
mounting slot
3. Line up a 3
rd
mounting slot
