background image

 

Safety Instructions 

1. 

Read all of these instructions. 

 
2. 

Save these instructions for later use. 

 
3. 

Follow all warnings and instructions marked on the product. 

 
4. 

Unplug this product from the wall outlet before cleaning.  Do not use liquid cleaners or 
aerosol cleaners.  Use a damp cloth for cleaning. 

 
5. 

Do not use this product near water. 

 
6. 

Do not place this product on an unsuitable cart, stand or table; the product may fall causing 
damage or injury. 

 
7. 

Slots and openings in the cabinet and the back or bottom are provided for ventilation.  To 
ensure reliable operation of the product and to protect it from overheating, these openings 
must not be blocked or covered.  The openings should never be blocked by placing the 
product on a bed, sofa, rug, or other similar surface.  This product should never be placed 
near or over a radiator or heat register.  This product should not be placed in a built-in 
installation unless proper ventilation is provided. 

 
8. 

This product should be operated from the type of power source indicated on the marking 
label.  If you are not sure of the type of power available, consult your dealer or local Power 
Company. 

 
9. 

This equipment is to be electrically grounded.  This product is equipped with a three-wire 
plug with a third (grounding) pin.  This plug will only fit into a grounded AC outlet.  This 
is a safety feature.  If you are unable to insert the plug into the outlet, contact a licensed 
electrician to replace the outlet with a properly grounded outlet.  Do not defeat the purpose 
of the grounding plug! 

 
10.   Do not allow anything to rest on the power cord.  Do not locate this product where persons 

will walk on the cord. 

 
11.   If an extension cord is used with this product, make sure that the total of the ampere ratings 

on the products plugged into the extension cord does not exceed the extension cord ampere 
rating.  Make sure that the total of all products plugged into the wall outlet does not exceed 
15 amperes. 

 
12.   Never push objects of any kind into this product through cabinet slots as they may touch 

dangerous voltage points or short out parts that could result in a risk of fire or electric 
shock.  Never spill liquid of any kind on the product. 

 

13.   Do not attempt to service this product yourself, as opening or removing covers may  

expose you to dangerous voltage points or other risks.  Refer all servicing to qualified 
service personnel. 

 

14.   Unplug this product from the wall outlet and refer servicing to qualified service personnel 

under the following conditions: 

a. 

When the power cord or plug is damaged or frayed.  

b. 

If liquid has been spilled into the product. 

c. 

If the product has been exposed to rain or water.

 

d.  If the product does not operate normally when the operating instructions are 

followed.  Adjust only those controls that are covered by the operating 
instructions since improper adjustment of other controls may result in 
damage and will often require extensive work by a qualified technician to 
restore the product to normal operation. 

e. 

If the product has been dropped or the cabinet has been damaged. 

f. 

If the product exhibits a distinct change in performance, indicating a need for 
service.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

5

 

Summary of Contents for DM-5948S(T)(C)














Reviews: