Specifications
Power ranges:
0.00 to 19.99 Watts, resolution 0.01 Watt
20.0 to 999.9 Watts, resolution 0.1 Watt
1000 to 2000 Watts, resolution 1 Watt
The correct power range is auto selected.
SWR range:
1.00 : 1 to 99.9 : 1. Above 99.9 : 1, the meter reads “infinity”.
Frequency range:
130 kHz to 30 MHz
Amateur bands, 2200m, 630m, 160, 75m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m.
There are individual calibration factors for every Amateur band, which are auto selected.
Accuracy:
This is a precision instrument with 48 calibration points and each instrument is individually calibrated at
the factory. Expect Power measurements to be better than 5% over most of the power and frequency
range. SWR readings are calculations based on the same input data and have similar accuracy.
Modulation modes:
CW, SSB, AM, FM, RTTY, Data modes: WSPR, FST4, JT9 etc. SSB is auto detected and PEP measurements
are applied where necessary.
Max Power handling:
2000 Watts for the HF bands
500 Watts for 630m
100 Watts for 2200m
Alarm contact:
Solid state, opto-isolated, 50 Volts max, 500mA max, not polarity conscious.
Open resistance > 2 MOhm, closed resistance < 0.01 Ohm
Power Supply: 6 to 16 V DC, at 42mA (typical)
Connectors: Two SO239 panel mount sockets
Size: 105 mm wide, 58 mm high, 140 mm deep.
Weight: 410 gm
