background image

Atmos

When installing an Atmos system, we would recommend using the C380-IDC or CPCT380-IDC for the Atmos channels. 
These speakers employ a unique pivoting IDC (Inverted Dual Concentric) midrange/tweeter module which offers a 
wider dispertion charectoristic which works very good for for Atmos duties. More information on both the C380-IDC 
and CPCT380-IDC can be found on our website: monitoraudio.com

The reason we do not suggest the Platinum In-Ceiling II for Atmos duties is due to the tweeter being a fixed, angled 
position. The C380-IDC and CPCT380-IDC on the other hand offer up to 18 degrees pivot in all directions and can be 
fitted directly above the seating position in the case of a 2 Atmos speaker setup.

 Please see below for adeal positioning of 2 or 4 speaker setups.

Prior to Fitting the Platinum In-Ceiling II Speakers 

CAUTION: 

These Custom Install loudspeakers can only be fixed into plasterboard (dry-lined) or suspended 

ceilings/ walls with a thickness of up to 45mm (1 3/4”). Solid wall installation will require channelling out 
and frame work constructed to provide a structure for the Tri Grip dog legs to clamp to. For safety reasons, 

if you are unsure of your ability to provide a secure and safe fixing, do not attempt to fix these speakers, please obtain 
the services of a competent and qualified trades person.

CAUTION: 

Ensure that there are no water pipes or electricity cables running within the wall structure before 

cutting the speaker apertures. Work from secure steps and avoid trailing wires.

Over Tightening Warning

Attention installers:

Do not over-tighten the Tri-Grip Dog Leg clamps. Over tightening the clamping mechanism on any in ceiling/ in wall 
speaker can result in damage to the speaker mounting hardware, ceiling/ wall or speaker frame, and/ or deflection in 

the speaker frame during installation.

If you notice any of the above during installation, you have overtightened the Tri Grip dog leg. Back off the mounting 
screw until deflection is reduced to allow the product to sit firmly against the ceiling / wall. 

monitoraudio.com

5

2 Atmos speakers (in line with front left and right)

4 Atmos Speakers (in line with front left and right)

30°

125°

150°

45°

55°

135°

Ear Level

65°

100°

80°

Ear Level

Summary of Contents for PLATINUM IN-CEILING II













Reviews: