Monitor Audio PL100 STAND Platinum series, Owner'S Manual

Page: 19 / 40

PL100
A compact two-way loudspeaker featuring one 6.5” (165mm) RDT bass-mid
driver and C-CAM ribbon transducer. The PL100 has the superior bass definition and
articulate mid-range of the most accurate studio monitors, and its ability to generate the
deepest bass frequencies will redefine expectations of a small speaker. Tonally, the PL100 is
supremely accurate, communicating a lifelike neutrality across its astonishingly wide
frequency range. A rigid cabinet construction, coupled with proprietary bracing techniques
and damping technologies provide the optimum environment for its ultra-low distortion
drivers, providing a sound which is remarkably transparent and rich in natural
expression. The PL100’s C-CAM ribbon tweeter extends its response way beyond the
auditory threshold to capture the ultra-high harmonic frequencies that are part of the
natural spectrum of sounds, preserving the entire micro-dynamic character of every
performance. It’s lightening-fast RDT bass driver will reproduce the power and scale
of dramatic passages with a transient response to match the ribbon tweeter, ensuring
consistent phase and breathtaking fidelity throughout the frequency band. The PL100 is a
truly compact, wideband speaker capable of reproducing accurately the most demanding
of music and film scores.
The PL100 comes with a pressed, open mesh grille. This is invisibly held in place by high
strength neo-dynium magnets embedded within the, ARC baffle to give a clean finish to
the front. The grille is generally self-aligning when placed on the baffle, however, some fine
adjustment may be required.
For speaker positioning and connection options, please refer to page 23 - 26
Using the PL100’s Without the Monitor Audio Stand
Within the packaging of the PL100 you will find 8 self
adhesive rubber disks. These are designed to be used
when the PL100 is positioned either on a bookshelf or
a stand by an alternative manufacturer. They isolate the
speaker and help to prevent it from moving along the
surface due to the externally mounted inserts.
Place them around the insert as illustrated to the right >
14
monitoraudio.co.uk