3. Cut around the marked line.
4.
Test fit the speaker ensuring it fits neatly in the cut out and that the screw holes line up with the studs.
Do not try to remove the printed membrane off the front of the speaker.
5.
Check the depth of the speaker is correct. The front white membrane of the speaker should be flush with the plasterboard. If using 12mm
plasterboard, there should need to be any additional work to carry out but checking is advisory.
If it is lower than the plasterboard, use the supplied card shims to space it off of the studs.
If it is proud of the plasterboard then some material will need to be taken off the studs to ensure it is flush.
Summary of Contents for IV140
Page 1: ...INSTALLATION INSTRUCTIONS...
