background image

Quick Start Guide

Telemetry Menu

This is the first screen to appear when the 
Q-10/20 is powered up. You can use it to  
view your vehicle’s distance and speed 
information, and is the menu you will use  
most of the time while rallying.

Main Menu

The Q-10/20’s powerful mobile-phone style 
menu system lets you quickly adjust settings, 
access advanced features and perform  
an accurate calibration.

Calibration

Before you can use the Q-10/20 to  
measure distance, you will need to perform 
a calibration. The device includes a special 
calibration wizard that guides you through  
this process using simple on-screen 
instructions.

For best results use a distance  

• 

of at least 1 km/mile.

You can also manually enter a 

• 

calibration number by selecting  
‘Value’ in Step 2.

Distance Adjustment

The Q-10/20 includes a simple distance 
adjustment menu that lets you align the 
distance counters to a road book entry,  
or preset an initial value.

Both counters are adjusted at the  

• 

same time.

Turning On & Off

The Q-10/20 turns off automatically after five minutes of 
inactivity. Press any of the buttons, or start the vehicle 
moving to turn it on again.

Auxiliary Input

The Auxiliary Input (white colored wire) can be used to 
attach an external hand or foot switch to the Q-10/20. 
Once fitted, this can be configured in software to 
perform one of the tasks shown in the table.

To change the assigned task, navigate to Main Menu > Advanced > Auxiliary and make a selection from the 
list displayed.

Task Name

Description

Clear Interval

Clears the Interval Distance (default).

Freeze

Toggles Freeze mode on and off. When Freeze mode is on, the display will 
stop updating while the counters continue to operate in the background.

Counting Up/Dn

When the input is held low the distance will decrement. When held high 
the distance will increment.

* Q-20 only.

Interval Distance 

Counter

Total Distance 

Counter

Counting 
Direction

Quick press to clear 
Interval Distance

Hold for one second 
to clear Total Distance 
or Average Speed*

Quick press to cycle 
Distance and Speed* 
display

Hold for one second 

to load Main Menu

Press to make 
a selection

Press to change 
selected option

1

2

3

4

5

6

Increase  
distance

Decrease  

distance

Apply 

Changes

Cancel

© Monit Limited

Reviews: