Monicon Instruments Co, LTD.
Monicon Instruments Co, LTD.
Monicon Instruments Co, LTD.
Monicon Instruments Co, LTD.
CHR
CHR
CHR
CHR-
-
-
-14
14
14
1424
24
24
240/26
0/26
0/26
0/2624
24
24
240
0
0
0
Charging Method: Float Charging
Protections: Constant Voltage、Limited current、Output Short Circuit、
Reverse Polarity、Surge protection.
Efficiency: Full Load>75 %
Working Temperature: -30~ 70 ℃
Storage Temperature: -40~120 ℃
Relative Humidity: Max. 90 %
Dimensions: 210 mm(L)* 127mm (W) * 64mm (H)
Weight: 1700 g ±50 g
2.
2.
2.
2.
Installation and Operation
Installation and Operation
Installation and Operation
Installation and Operation
2.1
Make sure AC voltage selector switch on the battery charger is set to correct
voltage. Turn off AC power source before connecting to N、L terminals.
2.2
Connect positive and negative terminals of the battery to the positive and
negative output terminals of the charger; then turn on the AC power.
Note: The charger is equipped with start protection; the current output is disabled, if the
terminals are not connected.
2.3
The automatic battery charger is quipped with charging loop detection. The
charger stops automatically when the battery is fully charged. User does not
need to shut down the charger or remove the battery.
2.4
The charger is equipped with short and reverse polarity protections.
2.5
If red Error LED is on, please turn off the charger and check the polarities
and all the connections on the battery and charger. To avoid accident, do not
force charge the battery.
2.6
Please use accessories came with the charger. Do not use long screws; it might
punch through the case or internal circuit board.
Fan trigger temp.
Heat sink > 40℃
Protections
O.C.P.、Reverse Polarity、Short Circuit、VAC detecting
Max. Load
12V,20A ±1.5A
24V,10A ±1A
Min. Voltage
5.5VDC
8.5VDC
Fan Noise (dB)
35 ~ 50 db
Efficiency
X>75%
X>80%