Moni QY1988, User Manual

Page: 17 / 20

16
Do not listen to loud music, because this may lead to impairment of the hearing
VOL +
Press for a
short time
Switch to the
next song
Press for a long
time
Volume
up
The power button
must be on.
MODE
Press for a
short time
Change of
functions
Music button on one side
of the player
Press for a
short time
Horn
Press for a long
time
Volume
down
When the horn
rings, the other
melodies will not
be played.
Music button on the other
side of the player
Press for a
short time
Switch to the
next song
Press for a long
time
Volume
up
REMOTE CONTROL USE
I. PLACING OF THE BATTERIES:
WARNING!
The placement of batteries should be performed in the absence of children!
1. The batteries are not included in the set.
2. Remove the screw of the lid of the battery compartment with a screwdriver and set it aside.
3. After that place 2 pcs AAA (LR03) batteries in the compartment, make sure that you observe the respective polarity (+/-)
when you place them, it is indicated on the bottom of the compartment.
4. Replace the cover of the battery compartment and secure it with the screw.
5. The batteries must be handled by an adult. Do not allow the children to play with the batteries.
6.Warning! The placing of the further change of the batteries must be done by an adult.
II. Buttons of the remote control
– See Figure RC:
- F
– Forward – press in order to move the SUV forward;
- B
– Backward – press in order to move the SUV backward;
- P
– Connecting with the SUV – press in order to conned the RC to the SUV;
- L
– Turn on the left– press in order the SUV to turn on the left;
- R
– Turn on the right – press in order the SUV o turn on the right;
- S
– Speed select – press in order to move the SUV with low, normal and high speed;
- SL
– LED indicating light for the different speeds;
- BR
– Brake – press in order to stop the SUV from moving;
III. Connecting the remote control device to the SUV:
1. Turn on the power of the SUV, press and hold for a few seconds the P button
– in order to connect, until the light indicator
stops flashing.
2. Release the connecting button and the indicating light will turn off.
3. If the indicating light turns on again, then the connection is successful. If the indicating light does not turn on, then the
connection was not successful. Repeat steps 1 and 2.
4. After the connection was successful, it will not be needed to re-connect the remote control to the SUV.
5. When the indicating lights dims or start to flicker, then you should change the batteries.

Moni Trade Ltd., hereby, declares that this type of radio equipment model QY1988 complies with Directive
2014/53/EC. The complete text of EC declaration for compliance can be found at the following Internet address:
www.moni.bg .
IV. IMPORTANT INFORMATION ABOUT THE BATTERIES:
1. Always remove the discharged batteries and do not throw them away with the household waste, use the places
designated for that purpose. They are recyclable.
2. Use only batteries with the size and voltage, marked on the bottom of the battery compartment.
3. Alkaline batteries are recommended.
4. Always remove the batteries, if you will not use the product for a long period of time.
5. When you replace the batteries always replace them with new ones, always replace all batteries. Children should not be
present while you are replacing the batteries.
6. Do not mix old batteries with new ones.
7. Do not mix alkaline, standard (Carbon - Zinc), or rechargeable (Nickel
– Cadmium) batteries.
8. Do not throw the batteries in fire, because they may blow up or leak.
ONLY AN ADULT CAN USE THE REMOTE CONTROL!
The use of the remote control is always with priority over the manual and pedal operation with the SUV.
(If you use the remote control, the pedal will not work.)