Moni KL-1666, Instruction Manual

Page: 19 / 24

18
ASSEMBLY STEPS
➢
Make sure that the power button is in an
“OFF” position before assembly of the car.
1.Fixing the front wheels
– See Figure 1:
Press the button in the middle of the front wheel and slide the wheel
on the front axle until it is fixed. Release the button. You will hear a clicking sound. Pull the wheel slightly
towards you to check if it is locked in place. You can attach the other front wheel the same way. Place the
decorative wheel covers on the wheels and press carefully until they are fixed.
2.
Fixing the rear wheels
– See Figure 2:
Press the button in the middle of the rear wheel and slide the wheel
on the rear axle until it is fixed. Release the button. You will hear a clicking sound. Pull the wheel slightly towards
you to check if it is locked in place. You can attach the other rear wheel the same way. Place the decorative
wheel covers on the wheels and press until they are fixed.
3.
Fixing the steering wheel
– See Figure 3:
Connect the cable connector of the steering wheel to the car
cables from the dashboard. Place the steering wheel on top of the steering fork and align their openings for the
fixing screw. Slide the machine screw M5 through the openings and using a nut and a screwdriver fix the screw.
4.Connecting the battery with the car cables
– See Figure 4:
Connect the car cables with the battery
terminals as shown on the Figure. The red cable must be connected to the red terminal of the battery. The black
cable must be connected to the black terminal of the battery.
Warning! Connect correctly according to the
polarity. Never connect red cable with black terminal or vice versa. This may lead to short circuit.
5.
Fixing the rearview mirrors
– See Figure 5:
Distinguish the left from the right mirrors. Put the mirror sin the
corresponding openings on the vehicle body. Press carefully down until they are fixed.
6.Fixing the seat
– See Figure 6:
Place the seat over the battery on the designated place of the vehicle body.
Insert the rear plastic pins in the corresponding openings in the car body. Gently push down until the seat is fixed
into place. Secure the seat using 2 screws. It is recommended before attaching the seat to connect the car
cables with the battery terminals.
7.Attaching the front windshield
– See Figure 7:
Align the plastic pins of the front windshield with the
corresponding openings in the car body. The plastic pins must enter in the openings and to fix. Press the
windshield down gently. You will hear a clicking sound.
USE OF THE BATTERY OPERATED CAR
➢
Notice A:
1. When you change the direction of movement, first make sure that the car does not move. Otherwise, if you
change suddenly the direction of movement without stopping the car, you may cause damage of the gears and
motor.
2. If you are using the remote control, follow the guidelines in this instruction manual.
➢
Notice B:
Before you start using the battery operated car you must check whether you have performed the following:
•The car must be completely assembled, following the steps exactly as described in the manual.
•The bushings of the cables of the electric system must be correctly connected to the terminals of the
rechargeable battery (red bushing with red terminal, back bushing with black terminal).
•Before use you must check whether there is electricity running through the system – switch the ON/ OFF button
and check whether the music buttons function correctly.
•Check whether all screws are tightened.
➢
MANUAL CONTROL OF THE BATTERY-OPERATED CAR - See Figure U:
1.P
– Power button for turning the car ON or OFF..
2. F/B
–
Buttons for moving Forward/Reverse
➢
Notice: When you change the direction of movement, first make sure that the car does not move. Otherwise, if
you change suddenly the direction of movement without stopping the car, you may cause damage of the gears
and motor.
PARTS LIST
Before you start to assemble the battery-operated car, take the parts out of the packaging and check whether all
parts indicated in the list below are present. Keep the packaging until you have completely finished the
assembly.
See Figure PD : 1. Car Body
– 1 pc;
2. Seat
– 1 pc;
3. Rear-view mirrors
– 1 set (left and right).;
4. W heels
– 4
pcs; 5 . Front wheel cover
– 2 pcs;
6. Rear wheel cover
– 2 pcs;
7 . Charger
– 1 pc;
8. Remote control
– 1 pc;
9.
Front windshield
– 1 pc;
10. Steering wheel
– 1 pc;
11. User Manual;