18
the SUV stops moving.
•To move the vehicle backward, shift the lever to down position (reverse) and press the foot pedal. If you release the pedal,
the SUV stops moving.
3. Foot pedal:
Applies power (speed) to the vehicle. To move the SUV, press the pedal down. To brake or slow down,
release pressure from the pedal.
4. Sound buttons:
Press for sound playing.
See Figure H/L:
Valid only if the product you bought has the function for high and low speed.
Note:
The High Speed Protective cover must be removed only by an adult. Before removing the HIGH SPEED protective
cover: Make sure your child knows how to steer, how to start and stop the product and knows the rules for safe driving.
A. Remove the two screws on the top of the high speed protective cover with a screwdriver.
B. Remove the high speed protective cover.
Then you can push the shifter into the
“high speed” position.
C. Press down the foot pedal.
The product is designed to operate in low speed only in reverse.
WARNING! IMPORTANT!
Always stop the SUV when changing the direction of movement or the speed in order to avoid
damage of the gearboxes or motors.
REMOTE CONTROL USE
ONLY AN ADULT CAN USE THE REMOTE CONTROL!
The use of the remote control is always with priority over the manual and pedal operation with the SUV.
(If you use the remote control, the pedal will not work.)
I. PLACING OF THE BATTERIES:
WARNING!
The placement of batteries should be performed in the absence of children!
1.The batteries are not included in the set.
2.Remove the screw of the lid of the battery compartment with a screwdriver and set it aside.
3.After that place 2 pcs AAA (LR03) batteries in the compartment, make sure that you observe the respective polarity (+/-)
when you place them, it is indicated on the bottom of the compartment.
4.Replace the cover of the battery compartment and secure it with the screw.
5.The batteries must be handled by an adult. Do not allow the children to play with the batteries.
6.Warning!
The placing of the further change of the batteries must be done by an adult.
II. Buttons of the remote control
– See Figure RC:
-
F
– Forward – press in order to move the SUV forward;
-
Rb
– Backward – press in order to move the SUV backward;
-
L
– Turn on the left– press in order the SUV to turn on the left;
-
R
– Turn on the right – press in order the SUV to turn on the right;
-
S
– Speed select – press in order to move the SUV with low, normal and high speed;
-
HS/ NS/ LS
– LED indicating light for the high/ normal/ low speed;
-
B
– Brake – press in order to stop the SUV from moving;
-
C
– Connection button.
III. Connecting the remote control device to the SUV:
Long press C button for connecting for 2 ~ 4 seconds, the low
speed indicator will start flashing. Then press the ON/ OFF button on the vehicle dashboard. If the low speed indicator goes
from flashing to long light, then the connection was successful. If the indicator only flashes, then the connection
wasn’t
successful. In this case take out the batteries from the remote control and place them back. Then repeat the steps above.
NOTE:
1. If you do not use the RC for 10 seconds, it will turn off automatically.
2. When you change the old batteries with new ones, you have to re-connect the RC to the SUV.
Moni Trade Ltd., hereby, declares that this type of radio equipment model JS360 complies with Directive
2014/53/EC. The complete text of EC declaration for compliance can be found at the following Internet address:
IV. IMPORTANT INFORMATION ABOUT THE BATTERIES:
1. Always remove the discharged batteries and do not throw them away with the household waste, use the places
designated for that purpose. They are recyclable.
2. Use only batteries with the size and voltage, marked on the bottom of the battery compartment.
3. Alkaline batteries are recommended.
4. Always remove the batteries, if you will not use the product for a long period of time.
5. When you replace the batteries always replace them with new ones, always replace all batteries. Children should not be
present while you are replacing the batteries.
6. Do not mix old batteries with new ones.
7. Do not mix alkaline, standard (Carbon - Zinc), or rechargeable (Nickel
– Cadmium) batteries.
8. Do not throw the batteries in fire, because they may blow up or leak.
Summary of Contents for JS360
