ASSEMBLY STEPS
•
WARNING!
Adult assembly required.
•
Note:
Some parts might be factory assembled.
•Care should be taken in unpacking and assembly of the vehicle. Do not allow the children to play with any of the parts or to
help in the assembly of the vehicle. Risk of injury due to small parts, sharp edges and sharp points in the vehicle’s
unassembled state.
• Identify all parts before assembly and save all packing material until assembly is complete to ensure that no parts are
discarded
• After each step you must check if each part is correctly placed and well fixed. Follow strictly each step and study well the
assembly figures.
• Assembly tools needed: screwdriver (not included in the set) and spanner (not included in the package).
•
DO NOT
over-tighten in order to avoid any damage.
1.Mounting the front fork, front wheel and fende
r – Take the front wheel axle and slide it through the opening on the left
side of the fork. Put a washer
slide the axle through the front wheel
put one washer
slide through the opening on the
other side of the fork. Put a washer and a screw on each side of the fork, which shows out of the fork. Fix using 2 spanners.
After that slide the fork through the fender and the opening in the motorbike body, designated for it.
2.Attaching the handlebar –
Place the handlebar on the upper part of the front fork and fix it using a M5*32 round machine
screw and nut.
3.Mounting the basket
– Attach the basket on the rear part of the motorbike using four Ø4Х10 screws with flat head.
4.Attaching the seat
- Place the seat on the curved part of the motorbike body. Fix it using flat head screw (Ø4Х10).
12
USE OF THE PRODUCT
Notice:
When you change the direction of movement, first make sure that the motorbike is not in motion. Otherwise, if you
change the direction of movement suddenly without stopping the motorbike first, the gears
and motor may get damaged.
1.Before first use time, connect the cables to the battery terminals. Red cable must be connected to red terminal. Do not
connect red cable with black terminal. Otherwise, you can cause short cut.
2.Charge the battery completely before using the motorbike for the first time. The charging hole is on the backside of the
motorbike. Connect the charger plug to a power outlet and its socket to the motor outlet.
3.Charge the battery for the first time for 8 – 10 hours, but not more than 12 hours.
4.Before charging the battery, you must turn off the motorbike from the power button.
5.After each use, charge the battery for 8 – 12 hours, but not more.
6.When the speed of the motorbike visible is reduced, you should charge the battery.
7.In order to move the motorbike forward: 1.Turn on the power button (ON/ OFF). 2. Put the forward/ backward switch to
position Forward. 3. Push the pedal.
8.In order to move the motorbike backward: 1.Turn on the power button (ON/ OFF). 2. Put the forward/ backward switch to
position Backward. 3. Push the pedal.
9.Before changing the directions forward – backward, the motorbike must not be moving.
10.If you are not using the motorbike, turn off all of the buttons and place them in neutral position.
Do not listen too loud music, because this may lead to impairment of the hearing.
CHARGING OF THE BATTERY OPERATED MOTORBIKE
WARNING!!!
•
IN ORDER TO AVOID FIRE AND ELECTRIC SHOCK:
-
NEVER USE
battery or charger of other brand or another product. Always use only the rechargeable battery and adapter
provided with the bought product.
- Do not use the battery or adapter for another product. This may result in overheating, fire or explosion.
-
NEVER
change the electric current. Making any changes to it may lead to short circuit, fire or explosion or the system may
permanently get damaged.
•
Do
not allow Your child to charge the battery.
-
DO NOT ALLOW
DIRECT CONTACT BETWEEN THE TERMINALS OF THE BATTERY. THIS MAY LEAD TO FIRE OR
EXPLOSION.
- During charging keep the battery away from easy flammable items.
- Never pick up the battery by its cable or adapter. This may lead to damaging of the battery resulting in a fire. Pick the
battery by the corpus
ONLY
.
Summary of Contents for C031
