EnDaL smart
PC SOFTWARE – MONI LOG® ANALYZER
- 25 -
Please do not disconnect the USB cable from your PC or EnDaL smart, as long as the data
transmission takes place!
4 . 3 . 2
O v e r v i e w w i n d o w
The overview shows the current system time, the set synchronous interval and the number of the
saved data sets (see Figure 10).
Figure 10: Overview window of the EnDaL smart
Moreover, the following functions are available in the overview window:
1)
Reading out the measurement and diagnostic data
The retrieval of all recorded measured values and diagnostic data is made by clicking on
the button “Reading out EnDaL smart”. According to the available measured values the
corresponding programme and diagram tabs open.
2)
Defining the view period
By means of the view period (see Figure 10, no. 2), the display of data can be limited to
the desired time range. This facilitates the data analysis and the finding of certain events.
Enter the desired start and end date in the fields and confirm the entry with the aid of the
Enter key of your keyboard or by means of the green button to the right of the input fields.
1
2
