7
TAMPER ALARM
The tracker has a built-in tamper switch on its base. If the tracker is removed or falls off, it will
trigger an alert. The switch is spring loaded and the tracker must be secured to a flat surface
for the switch to be depressed. The magnets allow attachment to most suitable flat metal
surfaces.
The switch must be depressed for at least 15 seconds for the tamper to become active.
Releasing the switch for more than 4 seconds will cause the tracker to wake up (if in sleep
mode), find its location and send an alert. See page 9 for alert types.
PLACEMENT & SECURITY OF THE TRACKER
The tracker has built-in magnets to assist with attaching the tracker to a vehicle, equipment or asset.
Ideally, it should not be placed under metal which can block GPS satellite reception.
We strongly recommend experimentation in different placements before deciding on a long term
location.
In some situations the built-in magnets may not be strong enough, or suitable, to keep it attached.
Locations such as on a trailer chassis and then driving over speed bumps or potholes the shock of
which could cause the tracker to become detached.
Placement must also take into consideration the rubber cover over the on/off switch and SIM card
slot. This should not be easily accessible to anyone wishing to disable or turn the tracker off.
Other means of securing the tracker from becoming detached or tampered with must be sought.
LED’s – WHAT THEY MEAN
Green LED — Mobile GPRS signal state
Unlit
off
Lit solid
searching
Flashing once every 3 sec’s
working
Blue LED – GPS signal state
Unlit
off
Lit solid
searching
Flashing once every 3 sec’s
working
Red LED – battery
Lit solid
charging
Off
fully charged
MULTIPLE TRACKERS – USERNAME LOGON
If you have more than one tracker, call Mongoose to request an account. You can choose your
own username and password that allows you to monitor all devices with just one logon.
DEVICE INFO’
IMPORTANT: If not completed, some functions will not operate.
On APP, select ‘
device info
’ and complete all the details.